Wireless Communication of K Technologies

Posted: July 27, 2015 | Author: | Filed under: Manufacturer | Tags: | Leave a comment

Wireless Communication Company

K Technologies, a fast growing company,  has been developing the most advanced wireless telecommunication, data, video and multimedia products. The headquarters of K is located in Taiwan. Over the years, Airwave has manufactured and achieved a high level of vertical integration, implementing precise coordination from R&D product planning to marketing and sales. Our quality management, innovative design and superior customer service enable us to be the leader in wireless industry. We specialize in OEM/ODM wireless system, wireless communication chipset and 2.4 /5.8 GHz RF module.

Major Products

Currently we offer the following products with complete solutions:

  • Custom designed microwave and RF components, such as MMIC, and RF modules
  • 2.4/5.8GHz AV sender, 2.4GHz CATV sender, surveillance monitor system, wireless remote extender etc.
  • Power line communication
  • 2.4GHz digital audio

R & D Strengths

In wireless communication industry, K is well-known for its R&D strengths featuring in the following:

  • Heavy investment in state-of-the-art R&D equipment and software development.
  • Design expertise in wireless audio / video, security products and broadband networking equipment.
  • Extensive knowledge of wireless telecommunication technologies.
  • Dynamic research team with strong commitment to wireless industry.

Manufacturing Capabilities

As an ISO 9001 certified company and international wireless technology provider, K now has expanded two more offices in Taiwan as well as our office and manufacturing in China to meet the extensive demands of OEM / ODM market. Our rapid growing distributors in Spain, Italy, Germany, France and many other European countries as well as Asian countries are proof of our success. K’s efficient processes of manufacture and innovative customer-oriented design have always been competitive and profitable in the global market.

Marine Antenna Manufacturer – BJTEK

Posted: July 23, 2015 | Author: | Filed under: Manufacturer | Tags: , | Leave a comment

BJTEK product is designed for the vessels masts that require long extra cables without signal constraint to the GPS receivers. The VHF marine antenna is not only hidden in a durable and waterproof cover; but also cable is protected by a base which can prevent damage. The special designs for marine antennas are really delicate; compact and reliable. Besides that have concinnity and compacted design for base. It is the integration of the high performance GPS patch antenna and a low noise amplifier into an extremely fully waterproof enclosure and when connected to a GPS receiver with 2.5 to 5.5V DC antenna power; it can provide excellent antennas signal amplification and out-band filtering with rejection for that receiver at 2.5V DC or 5.5V DC input voltage. We can supply to satisfy customers’ required marine antennas needs, such as shape; material; color and logo are all available. We provide the best antennas with high quality and competitive price. Fore more products information; please contact us.

BJTEK has specialized in producing marine antenna over 20 years of experiences. All of our marine antennas  are a complete combine with high security quality; sustained innovation; and advanced technology. BJNAV navigation is one of leader antennas maker in Taiwan; especially marine antenna mount applications.

Iron Casting, Ductile Iron Manufacturer

Posted: July 23, 2015 | Author: | Filed under: Industrial | Tags: | Leave a comment

Cheng Feng has been producing Ductile Cast Iron (Ductile Iron) for over thirty years. Ductile iron, iron casting, and ductile cast iron are specifically useful in automotive components, and for architectural and engineering solution. Contact us regarding any inquiries of your ductile irons.

Furthermore, Cheng Feng sends their technicians regularly to Japan for training while they have also hired senior technician periodically from Japan to be as instructor at their plant.

Not only Cheng Feng imports newest production equipments from Japan and America for top of the line products, but also they have participated Meehanite Foundry Association of Japan, to be under the supervision and guidance in foundry technology.

Therefore, it is small wonder, Cheng Feng’s products not only widely accepted in the application of machinery industry domestically, but also welcome in Japanese market.

How to Find the Right Video Wall for the Right Application

Posted: July 20, 2015 | Author: | Filed under: Uncategorized | Tags: | Leave a comment

For business owners, creating an indelible first impression is critical to establishing their brand and starting the process to convert random passersby or potential clients into paying customers. Technology plays a big role in that impression and conversion process, but many business owners and managers are unsure of the best ways to implement technology into that process. Instead, they rely on static messaging – like a typical advertisement or static display – and individual contact from a representative of the company. While those old standby methods have their place, the simple fact is that any company not leading with a strong and distinct technological presence is leaving a big chunk of business behind.

That means finding a reliable and user-friendly way of integrating technology is a must. In the age of readily available and inexpensive high definition displays, the easiest answer is to put up a 1080p screen with some unique imagery and advertising content. But think about this: if one screen is good, aren’t more screens better? The answer here, of course, is yes. But the barrier of finding usable and easy-to-manage video installations becomes even more daunting than before when more screens are involved. Finding a solution that allows for simple content management through hardware – with no software, separate dedicated computers, or drivers required – is key.

What these businesses desperately need is a video wall solution. Now, that may sound a bit overwhelming, and with the wrong product, it can be. But new developments in video wall controllers are giving end users, even those who don’t have any experience with this kind of technology, the perfect option when looking to create and manage video wall solutions.

A video wall solution can be anywhere from four screens (a 2×2 configuration) to dozens and dozens of screens, depending on the application and venue. For businesses looking for more of an entry-level video wall controller, a four-screen environment should be plenty. With the right screens and some quality content, a 2×2 video wall will make for a dynamic addition to any business or store without overwhelming its audience or the person in charge of managing the display.

In particular, hardware-only solution are designed for a plug-and-play user experience. Simply plug in the input sources and HD screens to the controller, select the best configuration for the content, and it’s ready to go. For businesses searching for a leg up on their competition, a great video wall solution is the way to go.

To find an engaging and aggressively-priced video wall controller, SmartAVI offers a number of customizable options. The California-based company released the new 4K-Wall this month, which provides the utmost in control and enticing imagery for video walls.

Find out more about the 4K-Wall at http://www.smartavi.com/products/video-wall/video-wall/4k-wall.html or visit http://www.smartAVI.com to learn about all of the quality, professional audio and video products offered by SmartAVI.

Article Source: http://EzineArticles.com/?expert=Gene_Greenwald

Article Source: http://EzineArticles.com/8344950

Pipe Fittings – A Plumber’s Best Friend

Posted: July 20, 2015 | Author: | Filed under: Industrial | Tags: | Leave a comment

Pipes come in all sorts of sizes but eventually they need to connect. And sometimes they need to connect with each other. While the connections are sometimes straight, at other times they may take a turn in direction. For those situations, pipe fittings help to connect pipes of different sizes and diameters and help lines to change direction, often abruptly. And in the case of underground sprinklers, an opening needs to be in place for the sprinkler head.

Pipe fittings, like pipes themselves, come in different types of material. They can be made of strainless steel, copper, or PVC (which is short for polyvinyl chloride) to name a few. While many are rounded, there are other types of fittings. Male and female, plain end bell or socket, pipe clamp ends, or ribs are just a few. They are as varied as the pipes they connect and have varied requirements for strength depending upon the pipes and the material that they are expected to funnel, whether it is solid or liquid.

The best sources of pipe fitting are the local hardware or plumbing store. While it is sometimes possible to mix materials for pipes and the fitting it is not recommended. Most times the material for the fitting should match the material used for the existing pipes. Depending upon whether the goal is to join two full pipes or to repair a crack in an existing pipe without digging out the entirety of the system, purchasing a threading dies may also be recommended. Large retail stores may provide the items that a person needs but a plumbing store might be required for unusual prospects such as joining two pipes of different diameters.

Cost of pipe fittings varies by material and purpose. While there are exceptions, PVC pipe fittings typically cost less (in the range of a few dollars) than do stainless steel fittings, which can costs about $6 or $7. A specialized fitting, like those for infrared tube heaters, can cost as much as $80 or more. These also often require shopping at very specialized stores or online, which can add costs for shipping and handling. Depending upon a person’s budget shopping for these items in mass when they are on sale can save not only considerable money, but time later on as they will be available when they are needed and will not require a special trip to the plumbing store to obtain them.

Pipe fitting supplies [http://pipefittingssupply.com] are useful for those that work with pipes often. Pipe fittings [http://pipefittingssupply.com/pipe-fittings-connect-your-pipes-securely.html] help you secure pipes correctly and safely.

Article Source: http://EzineArticles.com/?expert=Revon_Sims

Article Source: http://EzineArticles.com/3773685

Embroidery Patches In The Modern World

Posted: July 16, 2015 | Author: | Filed under: Textile | Tags: | Leave a comment

Embroidery pattern have been around for quite a while. For the past decades, embroidery has mainly been used in uniforms. School logos can be seen on the breast pockets of several schools all over the country.

American soldiers also have different embroidery on their uniforms. There are also many corporations that require their employees to wear uniforms with embroidery pattern displaying the company’s logo.

In more recent times though, embroidery are being used for other purposes other than uniforms. If you have ever seen a race car driver on the track, you will have noticed the colorful embroidery on his jacket. These are actually the logos of his sponsor companies, who have found out that embroidery patches are a great way to market their company in a stylish manner.

If you go to a garments store, you can even find several different kinds of embroidery patches that anyone can attach to their own clothes as a fashion accessory. There are now many different kinds of embroidery patch designs to suit all kinds of personalities and fashion tastes. You can have your pick from girly designs like pink hearts and roses to more rebellious images like skulls.

The nice thing about embroidery patch is you can easily sew them on and take them off when you get tired of the design. If you have a denim jacket, you can easily change your look simply by sewing on a new set of embroidery on it. It is also practical to keep some extra embroidery pattern for different looks since they do not cost much at all.

While jackets and shirts are the most common locations of embroidery, you can also attach them to other pieces of clothing. In fact, the next time you are on a busy street or on the mall, you might notice that several people are actually sporting embroidery on their jeans, their caps, or even their bags.

Traditionally, embroidery patches were attached by using stitches around the edges called merrowing. Although this method is still widely used today, there are also some kinds of embroidery patches that can be stuck to material without the use of a needle and thread.

The backs of these patches are sensitive to heat and all you need to do is iron them onto whatever garment you wish to embellish and they will be permanently attached. It is definitely more convenient, but the downside to this is that you won’t be able to remove the patch even after you get bored with it.

You can also find more info on embroidery designs [http://www.allthingsembroidery.com/Embroidery_Designs/] and digitally enhancing embroidery [http://www.allthingsembroidery.com/Embroidery_Digitizing/] Allthingsembroidery.com is a comprehensive resource to know more about Embroidery.

Article Source: http://EzineArticles.com/?expert=Jonathan_Andrew

Article Source: http://EzineArticles.com/933031

Know More About The Advantages Of Aluminum Extrusion

Posted: July 16, 2015 | Author: | Filed under: Industrial | Tags: , | Leave a comment

Aluminum extrusion is a wonderful process which is undertaken by a number of firms who provide some extruded products to the customers. This entire procedure is usually used in the production process. It helps in creating different parts of homogenous cross sections. It is not at all a simple process to carry out and this is why people hire experts for doing this. The wide ranging benefits of aluminum extrusions will surely help you in a big way. In this article, we are going to talk in particular about advantages of this process.

The companies that manufacture aluminum products usually provide the extruded profiles and systems as well. They even look out for special customers who can order such products. However, it is extremely important on their part to take good care of the quality of products. Without manufacturing high quality products they can never generate some fine results. The people in automobile industry certainly require this procedure and this is why they hire specialized professionals for the job. The fabricated shapes and sizes will surely appeal to you and their benefits are simply amazing.

Let us now talk in detail about knowing more about the advantages of aluminum extrusion. You got to pay proper attention here.

The benefits revealed
• As we all know that aluminum is a popularly accessible metal worldwide which is used in manufacturing several great products. The extrusion process helps in taking good advantage of the aluminum properties. Several shapes can be easily achieved using this procedure.

  • This procedure is really economical as you don’t have to make use of heavy and expensive machinery here. You can easily achieve this by simply creating different shapes without actually investing a huge sum of money in going for technological advancement. Other methods such as casting can prove to be really expensive as compared to extrusion.
  • The items which are manufactured using this procedure always have a longer life and can withstand a lot of pressure. You can easily use such products for a long period of time without worrying about anything. They are resistant to all kinds of issues and so you don’t need to worry.

These are some of the finest advantages of aluminum extrusion that you should know about. You got to ensure that you gain proper information regarding this procedure so that no issues bother you. I am pretty convinced that you will be able to look out for some fine options. This is a very trusted and reputed method that will help you in generating some fine results. It is of utmost importance to hire the right company for carrying out this task. Without expert help you will never be able to generate quick results. So, what are you waiting for? Go ahead, and grab the opportunity to carry out aluminum extrusion in the right way. It would definitely prove to be really beneficial for you.

Finding aluminum extrusion and die casting services can be a tough task to perform. You got to visit our website today in order to acquire such services.

Article Source: http://EzineArticles.com/?expert=Miten_Shah

Article Source: http://EzineArticles.com/8158733

MIG Welding Equipments and Related Information

Posted: July 15, 2015 | Author: | Filed under: Industrial | Tags: , | Leave a comment

There can be no doubt that MIG (Metal Inert Gas) welding is a great leap forward in the advancements of welding technology. The almost perfected, all-in-one process makes MIG welding lot more convenient. Load the filler wire onto the machine, set your amperage, and there you go.

Learning the basics of the MIG welding equipment may call for some initial strain. But once you become familiar, MIG welding is an easy process and you will be able to obtain clean and tidy welds. In MIG, a spool of solid-steel wire is fed from the machine, through a liner, then out of a contact tip in the MIG gun. The contact tip is either hot or electrically charged, when the trigger is pulled and melts the wire for the weld puddle.

There is no denying that MIG welding is costly when compared with the other processes. Machines as also the filler wire are much more expensive than stick welding machines and electrodes. Besides, MIG welding applications are also restricted, as it may not be suitable for all types of welding.

There are automatic and semiautomatic MIG welding machines. An example of automatic MIG is a robotic arm often seen welding car frames in an auto assembly plant. Semiautomatic MIG welder is when an operator holds the MIG gun and manipulates the weld pool. In automatic MIG, an operator sets up and watches over the machine. An experienced welder is the preferred because he has the right touch and knows what it means to be in the welding zone.

But most MIG welding machines are semi-automatic arc welding machines in which a perpetual, breakable conductor electrode and a defending gas are supplied by implementation of a welding gun. On the tip of the gun, there is electrical energy to the wire. The shielding gas and the wire are set in movement simultaneously to create the weld when the mechanic lowers the induction of the gun.

A variety of MIG machine models are available in the market. The main difference between a cheap and expensive MIG welding machine is ease of use. Do not buy a MIG welding machine just because it’s cheap! Ask some professionals before you buy and tell them the specifications if you can.

You can get a good quality MIG welding machine provided you can afford it. A good machine costs at least $400 to $500. You can buy a cheaper machine, but most of them may not be of reliable quality. But a redeeming feature about a small compact machine is – you can plug it right into 110-V outlets in your garage and commence operation.

But, please ensure there is a 50-amp fuse-or whatever the manufacturer tells you-or else, you will blow out your electricity. MIG regulates to several degree of electrode length and permits for long welds with lesser disruptions and intervals.

In MIG welders machine is indeed versatile and apt for a variety of applications including – automobile body repairs and improvement, trailer hitches, unit projects, farm/ranch equipment repairing machine barrows, bicycles, and others.

The quality of MIG welders and the prices continue to fall as more of them are manufactured in Eastern Europe and China. Expensive MIGs are more reliable to use than low end welding machines because they have more efficient electronics inside and better wire feed units.

Inverters are starting to find their way into MIG welding machine market. They can offer a lot of features at a lower cost than the traditional transformer based welding machines. The inverter technology is currently aimed at increasing the speed of welding in high amp spray transfer, and avoiding the transitional globular transfer phase. Inverter based welders however do not currently offer any advantages for automobile body work.

Alex David is a professional writer working with Everlastgenerators and he writing many articles about Mig welding, Tig Welder. For more information, visit everlastgenerators.com. Contact me at weldings.info@gmail.com

Article Source: http://EzineArticles.com/?expert=Alex_David

Article Source: http://EzineArticles.com/6964478

CNC Machining Center – Let’s Take a Closer Look

Posted: July 14, 2015 | Author: | Filed under: Industrial | Tags: , | Leave a comment

CNC is the acronym for Computer Numerical Controlled machine gadgets typically used in the machining services. These are typically favored in varied industries where some processes need to be done faster.

The main feature of these are to repeat processes hence the machining center designs tailor made programming for this. They perform repeated and extensive work which includes broaching, milling, turning, honing, etching, jig boring, drilling rather easy.

And if you need to replace your old lathe, press brakes, wood working or other machines with the new technology of the computer controlled machining gadget then this the best place to have the right bang for your dollars.

These machining tool has now become popular in a number of businesses and industries typically because they assure to provide rather convenience to the manufacturers. No matter if some performs only secondary operations like, anodizing, finishing, polishing, lapping and welding, still these are most sought after by the companies worldwide. The immense popularity of the Computer Numerical Controlled machine centers has thus also added a dimension to the way the machining centers carries out the job. The center is basically superb heavy duty cutter and comprises of a work-piece, the tool and the actual machine.

When selecting the CNC machining gadgets it is important to take a closer look into some of the important factors, like the speed, the capability and the capacity of the gadget; mostly, the diameter capacity of the machining gadgets range from 1 inch to 6 inches. The capability of these machines sets the tool’s ability in providing the machining services for an array of materials such as carbides, ceramics, cast iron, bronze, brass and aluminum.

In the internet world, the scope is rather broad to select CNC machining center online.

Article Source: http://EzineArticles.com/?expert=Edwards_Thomas_Harris

Article Source: http://EzineArticles.com/4284813

Taiwan Professional Rotary Table Supplier – Spintop Machinery

Posted: July 10, 2015 | Author: | Filed under: Industrial | Tags: | Leave a comment

Spintop Machinery has initiated generation of the NC rotary table in year 1996 in collaboration with Industrial Technology Research Institute (ITRI) for related items and parts; in any case. With many years of experience behind us in NC rotary table, we have added to a few models of NC turning table and the NC indexing table and we have gotten high thankfulness from the business and our esteemed clients.

As of late in the business sector, NC rotary table with DD engines are consolidated with existing controller accessible for the fourth point or fifth hub on the machine. On the other hand, DD servomotors obliged high accuracy control framework, so it gets to be crucial to get join the more elevated amount of controller, for example, HEIDENHAIN, Siemens, Fanuc 31iM and Mitsubishi M70 for the machine which thus will expand the general expenses. Because of this reason, SPINTOP built up a model of outer CNC controller that could be interfaced with the first controller or low-level CNC controller to meet the prerequisite of DD engine also keep the expense sensibly low.

Take your efficiency to new levels with practical, great turning tables and more from CNC rotary table technologies. Contact Spintop Machinery for more information.